Quote from: Beutelschneider on October 26, 2013, 01:58:50 PM

Problem solved!!

I was really annoyed about my V2 blades sometimes not connecting to my stratum proxy/resetting on their own, resulting in low efficiency and uptime. Few times they went down for 1 or 2 hours without any reason.

Someone mentioned to keep mobiles with enabled WiFi/WLAN away from the blades. Followed that hint and the connection to my proxy got more stable, decreasing the downtime! As next, i changed the physical network by connecting the blades to the machine running the proxy using good old cheap ethernet cable instead of plugging them to the WLAN-router to connect via WLAN to my proxy.

By now, i have an uptime of 4 days on my blades without any problems connecting to the proxy (my desktop) anymore Cool

This is so weird. Have two V2 Blades that had been working fine for a couple months, then recently both seemed to stop working. All chips showing enabled but they just weren't receiving and accepting many shares (would submit some I think they were hashing at a couple hundred MH/s or so) and kept rebooting. Tried resetting and power cycling the Blades, restarting Stratum proxy, etc. with no luck.

Then got on here and saw your post. My HTC Thunderbolt being connected to my home WiFi ended up being the cause (I very rarely get on my home network with it, usually just use it on the 4G network, but last night connected it to the WiFi to transfer some files). Turned WiFi on the phone back off and Blades started running and hashing away at ~10.9GH/s again. Really, really weird. These things must have really poor shielding or something. But just wanted to say thanks for posting this and wanted to post my experiences, may help others having a similar problem.