Quote from: MrTeal on October 26, 2013, 05:34:34 PM

Quote from: suprabitz on October 26, 2013, 05:24:50 PM

From Mine Peon. It shows a high hardware error rate, but on BTC Guild shows 35GHs at first then slowly goes down to about 29.93GHs after 24 hours. Not sure if its a bug in Mine Peon 0.2.3a or what.

Devices
Name   ID   Temp   MH/s   Accept   Reject   Error   Utility   Last Share
BAL   0   70   31445.31   17340   45 [0.13%]   16759 [49.08%]   13.82   13:18:19
Totals   1      31445.31   17340   45 [0.13%]   16759 [49.08%]   13.82

For the setup I have the Coolermaster 212 Evo with the .5mm thermal pad. Using the LGA standoffs with no back plate. Card is laying on the side so the fan is blowing one end and a usb fan is blowing on the back sides of the chips. On the bottom they are hot to the touch but not scalding. About 5-6 seconds before its uncomfortable.

What version of cgminer does MinePeon use, and what's your share difficulty? Old versions of cgminer counted one accepted share regardless of difficulty, while newer ones count shares as diff1 shares. That can make a huge difference in error rates.

CGminer 3.3.4

BTCGuild is on worker diff 32

sorry for the chopped up tables
From Mine Peon Pools data
URL User Status Pr GW Acc Rej Disc Last Diff1 DAcc DRej DLast Best
stratum.btcguild.com suprabitz_asicusb3 Alive 0 2912 17998 45 5655 14:08:14 573907 552542 [96.28%] 1214 [0.21%] 32 818151