Anyone with this error message?:
11:13:22:249 1e44 GPU 7, GpuMiner dk2an0 failed -4
11:13:22:294 1628 GPU 4, GpuMiner dk2an0 failed -4
11:13:22:296 17d4 GPU 6, GpuMiner dk2an0 failed -4
11:13:22:365 1d88 GPU 4, GpuMiner dk2an0 failed -4
11:13:22:381 1e5c GPU 6, GpuMiner dk2an0 failed -4
11:13:22:479 1e54 GPU 6, GpuMiner dk2an0 failed -4
11:13:22:491 1e4c GPU 7, GpuMiner dk2an0 failed -4
11:13:22:547 19b0 GPU 4, GpuMiner dk2an0 failed -4
11:13:22:631 1e50 GPU 7, GpuMiner dk2an0 failed -4
11:13:22:635 1590 GPU 4, GpuMiner dk2an0 failed -4
11:13:22:674 1e58 GPU 6, GpuMiner dk2an0 failed -4
11:13:23:277 1320 GPU 0, dropped current job (cp 2-4)
11:13:23:324 1d7c GPU 3, dropped current job (cp 2-6)
11:13:23:339 1e48 GPU 7, dropped current job (cp 2-2)
11:13:23:368 1e6c Quit, please wait...
This is 8 RX580 8gb .
Check previous post , play with -h and -dmem parameter
This version is not so easy to use because you have to adjust "-h" and "-dmem" values often, I will try to improve it soon.
1. "-dmem 1" requires twice more memory, make sure you have enough virtual memory. For example, if you have 6 GPUs 8GB, set virtual memory to 6*8=48GB.
2. Check how much memory miner allocates, it shows something like "(Memory used: 5128MB)", make sure you have this memory on your GPU.
3. You can see low hashrate if you use almost all memory on GPU, try to reduce "-h" value a bit.
Guys if you are getting the "GpuMiner dk2an0 failed" error, be sure to note Claymore's comments above. I was initially getting the same error with my RX480 8GB rig. Lowering to -h 1024 will solve the issue but make the program only see 4GB on my cards. After changing page file to 48GB, the miner runs beautifully with default -h and -dmem settings.
Ellesmere RX480 8GB, same modded BIOS, default miner settings:
CryptoNote Miner 9.7 - 850 H/s
CryptoNote Miner 10 - 987 H/s
Thanks Claymore!