Quote from: telep on April 08, 2018, 09:23:29 AM

Anyone with this error message?:

11:13:22:249   1e44   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:294   1628   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:296   17d4   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:365   1d88   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:381   1e5c   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:479   1e54   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:491   1e4c   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:547   19b0   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:631   1e50   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:635   1590   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:674   1e58   GPU 6, GpuMiner dk2an0 failed -4
11:13:23:277   1320   GPU 0, dropped current job (cp 2-4)
11:13:23:324   1d7c   GPU 3, dropped current job (cp 2-6)
11:13:23:339   1e48   GPU 7, dropped current job (cp 2-2)
11:13:23:368   1e6c   Quit, please wait...

This is 8 RX580 8gb .

Check previous post , play with -h and -dmem parameter

Quote from: agtprvctr on September 29, 2017, 08:37:34 PM

Quote from: Claymore on September 29, 2017, 07:28:34 PM

This version is not so easy to use because you have to adjust "-h" and "-dmem" values often, I will try to improve it soon.
1. "-dmem 1" requires twice more memory, make sure you have enough virtual memory. For example, if you have 6 GPUs 8GB, set virtual memory to 6*8=48GB.
2. Check how much memory miner allocates, it shows something like "(Memory used: 5128MB)", make sure you have this memory on your GPU.
3. You can see low hashrate if you use almost all memory on GPU, try to reduce "-h" value a bit.

Guys if you are getting the "GpuMiner dk2an0 failed" error, be sure to note Claymore's comments above. I was initially getting the same error with my RX480 8GB rig. Lowering to -h 1024 will solve the issue but make the program only see 4GB on my cards. After changing page file to 48GB, the miner runs beautifully with default -h and -dmem settings.

Ellesmere RX480 8GB, same modded BIOS, default miner settings:
CryptoNote Miner 9.7 - 850 H/s
CryptoNote Miner 10 - 987 H/s

Thanks Claymore!

kemo6600

Posts

Merits