Quote from: bitcad on October 31, 2013, 10:16:21 AM

Quote from: smoothrunnings on October 30, 2013, 02:20:36 PM

I would recommend you install CK's latest firmware, I think that's still 0821. I have seen a couple of people complain they have had nothing but problems with the latest Avalon firmware installed on their machines.

Flash the machine with the CK firmware, do not restore the settings. And add your mining servers back manually and confirm if it's working.

I am not sure if you have are doing this, but my Avalon's are set to failover and I have two pools added to them, I found when I only added one Pool the hashing sometimes would not start at all, it's only when I added the second pool (as a failover) I didn't have any issues at all and at restart the hash kicks on pretty quickly.

Keep in mind when you update the firmware (pushing it back to CK's 0821) the default settings will be applied to the Avalon, so you will need to connect to it on 192.168.0.100.

When you connect a computer do your network does your computer get an IP address? If so there is a DHCP server (application if you want to call it) running likely on your internet modem or router. Avalon's by default enable DHCP server so you need to make sure this is disabled as two DHCP servers on the same subnet (192.168.0.xxx) will fight with one another as you are technically only supposed to have ONE DHCP server in your network environment.

So disable DHCP on your Avalon, assign the Avalon a static IP within the range that your DHCP doesn't operate in; example again DHCP servers may say the first IP is 192.168.0.100 with a pool of 50 so .150 is the last IP it will hand out. You have IP's 192.168.0.1 to .99 and .151 to .254 which you can statically assign out to your equipment. If you assign a DHCP server address statically when a second device grabs that IP from the DHCP server which doesn't know what machines have that IP assigned statically you will have an IP conflict problem between the two devices.

The last thing I forgot to ask or mention is plug your computer into your network and confirm you can get out on the internet. Then go to command prompt (if you are running windows) and type "ipconfig /all" without the quote, then look for the network adapter that has 192.168.0.x for the IP, copy down the numbers, IP, Subnet, Gateway, DNS.

On your Avalon you it should have it's own IP, subnet, the gateway must match what your computer says, and DNS I set mine to 8.8.8.8 which is Google's openDNS server.

Re-flashed 0821 without keeping settings, connect wifi, dhcp (no hash), switch to manual IP, HASHING! Thanks all.

Hi

if you have the DHCP option ticked in Network settings-> DHCP and DNS then this will override you routers DHCP ip management.