Soldering pins?? 
No, no, no
Try this:
- use DDU
-enable onboard video as default display output in your mobo bios
-connect only the bricked card to the x16 slot (main pci-e slot of your mobo)
-boot pc
- run cmd as administrator and navigate to your atiflash folder
- from there type
Recovered many cards this way.
Good luck!
No, no, noTry this:
- use DDU
-enable onboard video as default display output in your mobo bios
-connect only the bricked card to the x16 slot (main pci-e slot of your mobo)
-boot pc
- run cmd as administrator and navigate to your atiflash folder
- from there type
Code:
atiwinflash -f -p 0 yourbiosfile.rom
Recovered many cards this way.
Good luck!
That exactly what i was thinking to do. The only difference is that i think i will you freeDOS instead of windows since a lot of people suggest that.
Just to be sure (don't be angry cvsea) anyone arguing against cvsea procedure?
Thanks to all of you
Why not just do it?
It takes 2 minutes.
Why would you want to use freedos? It's not rocket science.
If you have no drivers installed windows will not try to initialize your bricked card.
Atiflash will see it as a basic display adapter but will flash the bios onto it.