Quote from: cryptosize on April 22, 2018, 02:40:48 PM

Quote from: deathlire on April 22, 2018, 02:45:07 AM

Quote from: goodminer on April 22, 2018, 12:54:08 AM

Wow thank you very much. Cheesy

We can expect it in the next version?
Can you give me some advice for fine tuning my r7 370-s and rx 470s for all cryptonight versions, because on all types of algos, my desktop is little freezing, even on default settings, or even a much smaller intensity.

Nothing really can help that without the kernels that are executed. This also happens on any other gpu miner as well right?

For everyone:

   I'll explain a bit about OpenCL and how the "kernels" work a bit..
The kernel or "payload/work" is sent to the video card and is kind of like a singular pipe, okay that analogy sucked, but imagine
with all the "CU" Compute Units available.. the work from these kernels are sort of like threads on a miniature scale and they all
work according to the OpenCL standard (Hopefully) But it's like a faucet.. turn it on or off.. also you may need to turn down intensity
even more until you have a freeze free desktop which costs all the extra hashing power you would have had. Remember on SRBMiner you can
use decimals so don't forget that ex: "intensity 20.3" or what have you.

   I've left an earlier comment on a "low intensity" mode that is about splitting
up one big time job to do work into much smaller timed jobs and if done right, it really shouldn't have any negative impact on hashing speed,
or at least any notable impacts on it so that could be maybe be a modulation of 100ms or 1/10th a second per command queue or even smoother
by doing it roughly ~16.67ms for 1/60th a second, but I'm getting a bit to technical trying to explain it.. Anywho, a good way to perhaps implement
this would be to take an argument for say --desktop_mode ex. --desktop_mode 25 and plug that in which would do 40 pulses_per_second.

   I'm not the most intelligible on OpenCL and gpu kernel work, but to the best of my knowledge this is the only way that claymore/phoenix miners are doing this,
please correct me if I'm wrong (Which I probably am on a few things Tongue

). Since I have no source code to these miners, I've been doing a bit of work on XMRig-amd
and testing my findings out on that.. So far I haven't got into splitting up kernel execution times, but i did turn an almost static 32H/s into 35H/s by redoing a bit
of the way the kernel maps memory.. Not sure how big of an improvement it would be on a real card, but it probably would give a good bit more hashes on other cards..
I'm only able to test with an amd radeon HD6530D APU setup and the maximum i've ever got it to do was 42H/s at a slight bit of OC on claymore and around 50H/s if i jacked
timing up to almost 700Mhz from stock 444Mhz for this cards core..(Probably wondering to yourself how that is even achieved with these old APU's?? I call it part of the good
silicon lottery.) If you have an A6-series or A4's or whatnot, I might be able to also help with clocks and suggestions...

   Also if anybody would like to try and help coding for and helping SRBMiner be the serious go to for cryptonight mining with this low intensity thing and kernel work.. I'd gladly
accept the help and can set up a private git branch that we could work on that through xmrig source, if the Doktor gives an ok on doing, he could throw it into SRB with perhaps
minimal changes and nothing else will have it. My goal as a mining hobbyist is to make these miners work on pretty much all driver versions (Except the ones like the crimson beta
which doesn't include anything to use far as i can tell...)

Drivers tested with using DDU (Without Format):
  14.4 - Confirmed as working and stable for pre-GCN cards.
  15.7 - Can only confirm that it does not work with A6-series Apu's without driver crash.
  15.11 - Also same as 15.7.
  16.2.1 - Forget about it... for pre-GCN computing.

   Perhaps I should just ask Doktor if he in any way, shape, or form would like to collaborate even? I tend to use bitbucket for it's private git repositories with things such as these.
And by the way, here is something to talk about.. not sure if there is a rant section, but people that totally pack their miners and put in disassembly code that shuts off a miner for
having any debug software going, or show's faked hashrates to ppl who use nofee or cheats as they worded it, or are those numbers not just higher in the code.. SRB i'm 99.9999% sure
there isn't any of that since we're all getting just about the same hashes on all the open sourced ones, but this seems a good bit more optimized already with more share turn in's
compared to hashes, perhaps Dok already found those memory speedups

Okay, enough of my novella.. Thanks.

Thanks for the insightful post!

I have a couple of questions:

1) Has doktor83 released the source code of SRBminer?

IMHO, it's crucial to have the source code of any possible improvements, so that we don't end up with a Claymore v9.7 situation (the author has even refused BTC/ETH donations to release the source code to the community).

2) How is it possible that Claymore v9.7 can use the entire memory with 15.7.1 Catalyst driver, but other miners cannot do the same? Is there any OpenCL hack that makes 14.4 drivers redundant?

I don't even know if it's possible to copy/paste the OpenCL dll file from 14.4 to 15.7.1 or something like that to detect the memory properly...

1.) Nope, and don't think he's going to, but never know later on.

Far as claymore 9.7 goes.. probably some shady coding he doesn't want anyone to know, or just wants to keep it away from everyone for fee's possibly, never know.

2.) I did notice on 14.4 drivers that my vram was more around 1GB and switching over to 15.7.1 it has 2047MB for some reason detected on all the other miners, but claymore did find 2047 on both drivers..
so determining how it gets the m1 and m2 should be an easy fix, I know for a fact I only have 512MB dedicated, which is also shown in m2.. I'll have a look at which way xmrig/stak is polling the memory. iirc this has been an issue with those for quite awhile.. I've never been able to get any miner to work without dying except for claymore on 15.7.1, and believe me I am trying to find a workaround that doesn't involve switching and mangling drivers around to make something work.

How much memory does 14.4 show you compared to 15.7.1?