Quote from: Fishbones on November 11, 2013, 04:22:34 PM

Quote from: CYPER on November 11, 2013, 04:05:44 PM

Quote from: chrono030 on November 11, 2013, 03:53:15 PM

Quote from: CYPER on November 11, 2013, 02:07:49 PM

Quote from: CYPER on November 11, 2013, 01:15:41 PM

Does anyone know if it is OK to connect 2 of my modules from Jupiter 1 to Jupiter 2. I will move just the ribbon data cables over, so Jupiter 2 has 6 modules connected to it, but 2 of these are still powered by Jupiter 1 PSU.

Anyone?

I am sure you'll eventually try it, so let us know how it goes! I am suprised you have a board that actually supports 6 connections, my day 1 jup only has 4.

I just did. 6 boards using all 6 connection, using 1 V850 PSU.

Good to know. Thanks for testing. I asked KnC support if it was possible and they said the firmware did not support 6 modules Huh

What's the hashrate for 6 modules ?

Well it is currently increasing.
The 4 boards together were hashing at 565GH/s stable. I added 2 more from my under-performing miner (420GH/s with 3 hashing at around 107GH/s and 1 at around 100GH/s)
So I expect the 6 boards to reach around 770GH/s which might not happen, because:
Jupiter 1 (the good one) was using 0.98.1 Beta provided by Bitcoinorama = 565GH/s
Jupiter 2 (the bad one) was using 0.98 = 420GH/s. It was even less with any other firmware.