Quote from: Mudbankkeith on November 13, 2013, 08:29:17 AM

Quote from: jml on November 13, 2013, 04:05:21 AM

Quote from: eousphoros on November 13, 2013, 03:52:17 AM

Code:

cgminer version 3.8.1 - Started: [2013-11-12 21:43:52]
----------------------------------------------------------------------------
(5s):16.88G (avg):16.77Gh/s | A:84239 R:352 HW:3356 WU:233.8/m
ST: 2 SS: 0 NB: 45 LW: 108588 GF: 0 RF: 0
Connected to pool diff 16 with stratum as user 1
Block: 446cc771... Diff:511M Started: [03:46:42] Best share: 213K
----------------------------------------------------------------------------
[P]ool management [S]ettings [D]isplay options [Q]uit
AMU 0: | 335.8M/336.2Mh/s | A: 1660 R: 0 HW: 17 WU: 4.7/m
AMU 1: | 335.6M/336.1Mh/s | A: 1770 R: 0 HW: 20 WU: 4.5/m
BAJ 0: max 50C 3.34V | 8.328G/8.144Gh/s | A:40541 R:208 HW: 473 WU:112.7/m
BF1 0: | 2.666G/2.632Gh/s | A:13398 R: 48 HW:1002 WU: 37.4/m
BF1 1: | 2.602G/2.616Gh/s | A:13086 R: 64 HW: 917 WU: 36.6/m
BF1 2: | 2.701G/2.703Gh/s | A:13832 R: 32 HW: 929 WU: 37.9/m
----------------------------------------------------------------------------

All of the hw errors make me kinda sad.

Same as me, I am getting a lot of HW errors. PXY0 is an ASICminer blade overclocked and has a far less ratio between accepted shares and HW errors.

Code:

PXY 0: | 9.87/12.82/12.46Gh/s | A:2724 R:56+14(1.9%) HW: 393/.91%
BPM 0: | 2.38/ 2.38/ 2.28Gh/s | A: 486 R: 3+ 0(.63%) HW: 302/3.8%
BPM 1: | 2.35/ 2.34/ 2.17Gh/s | A: 465 R: 0+ 0(none) HW: 310/4.1%
BPM 2: | 2.36/ 2.36/ 2.14Gh/s | A: 425 R: 0+ 0(none) HW: 293/3.9%
BPM 3: | 2.32/ 2.32/ 2.21Gh/s | A: 443 R: 3+ 0(.68%) HW: 334/4.3%

Forget about the HW errors, What are you getting back from the pool? That is what matters.

Other the hw errors I am loving these little guys. I switched over to cgminer because bfg was giving me grief. Cgminer works flawlessly!