Quote from: knohult on May 01, 2018, 02:33:53 PM

Quote from: iSuX on May 01, 2018, 02:01:05 PM

Quote from: knohult on May 01, 2018, 01:25:50 PM

Hi there.
Make sure you unblock EthDcrMiner64.exe
(right click, general tab, check unblock, /ok)
Turn defender ON, and set an exception for EthDcrMiner64.exe
It can be useful to relax security while debugging, but it's bad form to ignore it forthwith.

I'd suggest you take a look at your log file.
I'm assuming you mean, claymore 11.7 was working before you updated windows, and you changed NOTHING else, drivers etc, cmiiw.
That being so, look at a previous log, (from when it was working), that will show your full init, through to mining, and then compare with your current log.
At some point, your current log will halt, if you line old/new logs up, you will see what SHOULD be happening next, and that is where you need to investigate.

Good luck.

I run the same config on another computer with claymore 11.7 and windows 1803. It will start without any problems. The difference is windows 10 pro on the working and windows 10 pro n on the non working. I don´t have any older logs left from the new rig. The config file is copied from the working computer.

Log from the working computer:
16:11:22:156   3504
16:11:22:159   3504   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
16:11:22:161   3504   º Claymore's Dual GPU Miner - v11.7 º
16:11:22:165   3504   º ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK º
16:11:22:167   3504   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¼
16:11:22:169   3504
16:11:22:171   3504   b583
16:11:22:378   3504   ETH: 3 pools are specified
16:11:22:380   3504   Main Ethereum pool is eu1.nanopool.org:9999
16:11:22:382   3504   DCR: 0 pool is specified
16:11:22:452   3504   OpenCL platform: NVIDIA CUDA
16:11:22:455   3504   AMD OpenCL platform not found
16:11:22:699   3504   CUDA initializing...

16:11:22:702   3504   NVIDIA Cards available: 1
16:11:22:704   3504   CUDA Driver Version/Runtime Version: 9.1/8.0
16:11:22:707   3504   GPU #0: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1 (pci bus 3:0:0)
16:11:22:710   3504   Total cards: 1
16:11:26:724   3504   NVML version: 9.391.01
16:11:27:276   3504   SSL: Imported 54 certificates from local storage
16:11:27:320   2a04   ETH: Stratum - connecting to 'eu1.nanopool.org' <198.251.88.37> port 9999 (unsecure)

Log from the non working computer:
16:31:13:690   22a4
16:31:13:690   22a4   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
16:31:13:690   22a4   º Claymore's Dual GPU Miner - v11.7 º
16:31:13:690   22a4   º ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK º
16:31:13:690   22a4   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¼
16:31:13:690   22a4
16:31:13:690   22a4   b583
16:31:13:905   22a4   ETH: 3 pools are specified
16:31:13:906   22a4   Main Ethereum pool is eu1.nanopool.org:9999

And the config itself:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
TIMEOUT 15
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal wallet.rig/email
-epsw x -mode 1 -ftime 10 -wd 1 -logsmaxsize 5 -r 60 -minspeed 80 -mport 0

Interesting, why the timeout 15?
Note, the exe string needs to be single line, no c returns, or line breaks etc.
Also, 2 things you could try on the problem rig.
-mode 1
-dbg 1

I'd try stripping that to the minimum, (also make sure you set your virtual memory to at least 16GB!!!)

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal wallet.rig/email -epsw x -mode 1

BUT.....I just checked, and it looks like nonopool servers are different to what you have above.

Should be

eth-eu1.nanopool.org

Are you 100% sure, the server you are using is correct?

Cheers