Quote from: achtung082 on May 08, 2018, 01:38:10 PM

Quote from: Zibo_ on May 08, 2018, 01:28:42 PM

Quote from: achtung082 on May 08, 2018, 01:20:01 PM

Quote from: akorsar on May 08, 2018, 06:13:04 AM

Quote from: tw0rak on May 08, 2018, 05:18:28 AM

Guyz - I tried to change speed of the fans...
This shit is screeaming like a pig in my basement and there is no need to be like that - chips have just around 45°C.

U used bitmain-fan-ctrl and pwm in SSH, but this shit doesnt made a change. It doesnt have any fan-ctrl or what?

Could somebody help?
How much temperature could this chips have?
Thinking about giving there some computer fans...

I suggest to disconnect front fan (that what I have done) till they release firmware update. It will drop noise level 50% plus I put under the unit noise cancellation pad. It helped another 10%. Hopefully it helps.

I swapped out both fans for SILVERSTONE FHP Series SST-FHP141-VF, temps don't go above 50 and power at the wall dropped to 280w.

My next test will be to use 2x Phanteks PH-F120MP 120mm PWM High Static Pressure Radiator Fan and or 1x Phanteks + 1x SILVERSTONE. If needed I will put a honeycomb cell on the rear fan.

But the SILVERSTONE FHP Series SST-FHP141-VF is a 140mm fan? I was thinking the same thing as you about changing the fans since it does not need to be as cold as 40C.

Yes, it's 140mm but mounts to 120mm spacing. I used it because it was what I had and have used them on older miners before. I actually have this one SILVERSTONE FHP-141 140mm it has a power and quiet switch.

Have you tried the Phanteks fans yet? I was thinking of buying some equal fans here in Sweden.