Quote from: Hooker29 on May 08, 2018, 01:39:34 PM

Same issue with 18.4.1. Goes from 27k+ to 0. Crash, restart, repeat. This is with Compute mode on or off.

The old blockchain drivers still work well. Have not yet tried with 18.3.4

Code:

09:20:17:882 3634 ETH: GPU0 27.570 Mh/s
09:20:20:720 3634 ETH: checking pool connection...
09:20:20:721 3634 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

09:20:20:773 3634 buf: {"id":3,"jsonrpc":"2.0","result":SNIP]}

09:20:24:900 360c GPU0 t=62C fan=35%
09:20:25:696 3608 em hbt: 0, fm hbt: 15,
09:20:25:696 3608 watchdog - thread 0 (gpu0), hb time 2953
09:20:25:697 3608 watchdog - thread 1 (gpu0), hb time 2609
09:20:28:200 3634 buf: {"id":0,"jsonrpc":"2.0","result":}

09:20:28:200 3634 ETH: 05/08/18-09:20:28 - New job from us1.ethermine.org:5555
09:20:28:201 3634 target: 0x0000000112e0be82 (diff: 4000MH), epoch 185(2.45GB)
09:20:28:201 3634 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:02
09:20:28:202 3634 ETH: GPU0 0.000 Mh/s
09:20:30:595 3634 sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate",SNIP]}

09:20:30:632 3634 buf: {"id":6,"jsonrpc":"2.0","result":true}

09:20:30:735 3634 ETH: checking pool connection...

You can free use 18.3.4 - they working fine.

Quote from: Claymore on May 08, 2018, 10:55:22 AM

Quote from: UnclWish on May 08, 2018, 12:51:04 AM

Quote from: Claymore on May 06, 2018, 04:35:42 PM

Quote from: MaxMidnite on May 06, 2018, 02:41:51 PM

Claymore gone very quiet these days, hope everything is ok?

I'm fine, thanks, is v11.7 too old and you want v11.8 right now?

Claymore, I'm encountered problems with Win 10 1803 and 18.4.1 drivers. My 1st GPU (active - monitor connected) drops hashrate to 0 after several minites (sometimes even less minute) after start. Sometimes hasrate rises than drops again, sometimes drops until restart miner. 2nd card (inactive - nothing connected) works normal. Use modded bios and setting OC and voltages in your miner. RX 580 8Gb cards.

Maybe it's need to add something in miner to compatibilty with new drivers? 1803 and old 18.3.4 driver works normal. But I'm afraid that it will be on all new drivers too...

Currently I recommend not to use 18.4.1 drivers.

Thanks. That's what I use now. We'll see what will be with next drivers...