Quote from: cryptonitro on May 08, 2018, 05:45:29 PM

Quote from: Overlast on May 08, 2018, 09:10:59 AM

Guys,
Overnight the blue leds started blinking. Usually no problem because after a restart/reboot all works fine again.
But this time they keep blinking even after several reboots. And the device is not reachable through the webinterface.
Someone, any suggestions what to do?
Could the sd card all of a sudden be corrupted?

Hi Overlast , SD is the original one ? when you shut it off wait at list 1 minute to test.

Do you have an other x10 ? if yes

try to invert the orange pi , let sd cards in place dont invert it.
see if the problem is now on the other miner
then just invert the SD card and check

If you have only one x10 , i suggest to rewrite the software on sd card.
check instruction here

Quote

if problem persist contact Baikal , you ll have probably orange pi in trouble

I have only one and already tried re writing on different sd cards. No luck. Yellow and blue leds keep flashing simultaneously and red led burning steady.
Checked network and cables; all ok.
Both leds on PI Zero (next to ethernet cable) both on.

I just contacted Baikal. Hopefully they can help.