Quote from: Ally_Rob on November 23, 2013, 12:24:13 AM

Quote from: shefflad on October 28, 2013, 04:22:27 PM

hi i have a good power supply all wiring as to the pictures 4 black 2 yellow on a splitter. the blade powers up for about 2 min 15 sec and then restarts.
i have installed virtual machine with win 7 32bit and ran in mining proxy then directed the blades to my pc in virutal machine but still no luck. i use the mining proxy download from bitcoin.cz and use bat file with my details, i have bitminter,slush pool and btcguild tried all different setting but still same.
can any one setup a proxy for me (via instructions or remote)and i will give 0.2 btc as a reward

My blade is ver2, green in color.

I have the same issue. I am using a computer PSU rated at 450 watts, upgraded from a desktop psu i was using.

The specs of the power supply are as followed:
3.3v@20a / 5v@20a / 12v@30a / -12v@.5a / 5vsb@2a

From the PSU -> Molex -> Molex splitter -> 2 yellow / 5 black -> Blade.

You'll see i get 4 x's at the end of the row for "CHIP" .
I just bought this PSU thinking the one i was using wasnt good enough. so bought this 450 one.
I did the PSU Bypass .. Jumped the green wire with the black next to it.
I tested the volts at the green connector and there good. various testing on the board get me voltage. With this gen2 - green pcb i just dont know what to do and what to expect at various points.
The configuration screen shows as follows :
http://s15.postimg.org/55q2pbc3v/Screen_shot_2013_11_22_at_7_10_48_PM.png

Thanks
Rob

BUMP