Quote from: Pete_X on May 11, 2018, 02:38:59 PM

Zawawa:

Just noted that when you stop the miner and it goes idle - the fans stay at the % they were running - even if the idle temp is in around 40c (normaly they are off there). So pse check if there is something stuck and does not get reset when the miner is stopped.

/ https://s7.postimg.cc/ze5mdcex7/Idle.png /

I could reproduce that behavior a few times:

1. Start miner and let it run a while
2. Stop the miner with "Pause" - Fans "stuck"
3. Close the miner - "Fans stuck"

Rig after 10 min or so:

/ https://s7.postimg.cc/4ze8m4kiz/Idle2.png /

Devices 1-3 are still at 23%/43%/27% - the only Device that looks kinda normal is Device 0.

Fan Settings for all Devices in GGS: Target 53c, Max: 65, Speed Min: 0, Max: 100

Restarting the miner does not solve the problem. What does stop the fans and gets them back to "normal" is i.e. starting Sapphire Twix. Start it, close it and they are back to normal - till ya start the miner and stop it again.

Nothing changed on the rig, W10, Cards 470/480/580 as before and driver is still 18.3.4. - as 18.4.1 is a no-go so far.

Thanks for the report. I am done with the new WiX-based installer and now preparing a new version.
Please wait for it and see the problem still persists.