Quote from: eternaluniverse on November 24, 2013, 07:20:09 PM

So I live in canada, where during our winter months we will be around 5 degrees to -30 degrees, the garage should be around 5 degrees to negative 20 max. I am currently running USB Block Eurpters with a USB Hub and a Raspberry Pi. My question is, can i run this setup in the garage to save on cooling cost of running fan -- which means can the USB Block erupter function at -20 celcius and also the Raspberry Pi.

I am also thinking about purchasing a blade in the near future, would that be fine to run in the garage. I head about using things to prevent condensation by for instance throwing one of those drying packets in my box holding my equipment.

Also with the block erupter without a heatsink would a 0 celcius room be sufficient cooling?

Thanks for help in advance,

again sorry if this has been posted I am finding it difficult to find the information.

I think it would make more sense to use the heat for the house. The small savings from not using the fan wont be much.
Not sure everything will start if you leave them out there not running and then try to start them up. If they are warm and then put outside they should be OK.

Good Luck!