Quote from: B00gieman on May 11, 2018, 08:22:25 PM

Quote from: B00gieman on May 11, 2018, 02:01:45 PM

Here we go again:

Miner:
7*1070 + 5*580

So on Claymore v. 11.6 i use This bat file:

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Miners\Claymore_Dual_Ethereum_v10.2\EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal walletaddress.rigcozinha -epsw x -allpools 1 -mport 4444 -cclock 1150 -mclock 2225 -cvddc 850 -mvddc 850

MSI Afterburnner 4.5.0:
Core: 0
Mem: +715
PL: 65%
Power Consumption: 1750w

PhoniexMiner config bat file:

Code:

REM
REM Example bat file for starting PhoenixMiner.exe to mine ETH
REM

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
PhoenixMiner.exe -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal walletaddress.RIGcozinha -proto 3 -cclock 1150 -mclock 2225 -cvddc 850 -mvddc 850 -log 0

Afterburnner config are the same

Power Consumption: 2150w

Whats the problem?
I like verter PM, but With This difference i cannot keep using.

After some tests i realized that the extra consumption is on AMD cards. So for now... the solution i'm using is Claymore for AMD cards, and PM for Nvidia cards.

I dont know why but PM is not executing the "in BOLD" command line:
PhoenixMiner.exe -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal walletaddress.RIGcozinha -proto 3 -cclock 1150 -mclock 2225 -cvddc 850 -mvddc 850 -log 0

Use hwinfo64 to check actual values the gpus are running at. For PhoenixMiner specify the voltage for each card so - cvddc 850,850,850,... -mvdcc 850,850,850... Same for frequencies.

I have multiple rigs configured this way on -18.x.x drivers perform as expected.