Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.7 (Windows/Linux)
Is it normal that the rig would crash after some time if I mix hynix and elpida GPUs?
I have 4 Sapphire Nitro+ 570 with elpida memory and 2 Sapphire Nitro+ 570 with hynix memory... if I run them separately then rig is stable, but as soon as I start to mix GPUs with different memory types on one rig... I would see crashes, reboots, etc...
is that normal? Any ideas?
Set clocks and voltages for each card, not same for elpida and hynix. Also what bioses you use?I have 4 Sapphire Nitro+ 570 with elpida memory and 2 Sapphire Nitro+ 570 with hynix memory... if I run them separately then rig is stable, but as soon as I start to mix GPUs with different memory types on one rig... I would see crashes, reboots, etc...
is that normal? Any ideas?
Original with timings from 1500.
I get 30 Mh on elpida and 29 on hynix, I tried running both down clocked to 1100 and 1800 and was getting 26 Mh but they still crashed after like 20 or 30 minutes. But as soon as I remove elpida GPUs or Hynix GPUs, the problems stop, had it running for 2 days without issues - only with one type of memory on one rig. Doesn't make any sense...