Quote from: BS001 on May 13, 2018, 11:07:16 PM

Quote from: AzzAz on May 13, 2018, 10:58:59 PM

Quote from: BS001 on May 13, 2018, 10:02:52 PM

Is it normal that the rig would crash after some time if I mix hynix and elpida GPUs?

I have 4 Sapphire Nitro+ 570 with elpida memory and 2 Sapphire Nitro+ 570 with hynix memory... if I run them separately then rig is stable, but as soon as I start to mix GPUs with different memory types on one rig... I would see crashes, reboots, etc...

is that normal? Any ideas? Huh

Set clocks and voltages for each card, not same for elpida and hynix. Also what bioses you use?

Original with timings from 1500.

I get 30 Mh on elpida and 29 on hynix, I tried running both down clocked to 1100 and 1800 and was getting 26 Mh but they still crashed after like 20 or 30 minutes. But as soon as I remove elpida GPUs or Hynix GPUs, the problems stop, had it running for 2 days without issues - only with one type of memory on one rig. Doesn't make any sense...

4 cards work, 2 cards work, 6 not? Looks like latest windows update...If you can test 2 elpidas with 2 hynix to be shure