Quote from: gingernuts on November 26, 2013, 11:39:06 PM

Quote from: mjgraham on November 25, 2013, 11:30:26 PM

First off I want to say thanks for any help, second I feel kind of dumb asking for help after all the reading I have done. What I have is a raspi to a level shifter to a quad board I built with one chip on it. I have tested the spi loopback thought the level shifter and that is good and using spitest-D 1 5000000 gives me 12~13 solutions and when I put a 2 in the chip I get nothing like I expect. However when i build the cgminer fork with the --enable-bitfury and try to run it it does not detect any chips and drops out at first I could not tell the screen just flashed had to put -T on there. Just any ideas would be helpful.
thanks
Jarrid Graham

Where did you get that version of spitest from that takes command-line options? Can you post a link please?

Well in the midst of not knowing what I was doing I put the v2 image from this and it is the home directory , you could mount it and it is in the /home/pi/spic1 dir
https://bitcointalk.org/index.php?topic=287590.0

I used kpartx -a image-file
mounts them to a loopback then you can mount /dev/mapper/loop0p2 to a dir and get it
of course this is all guessing your using linux