Quote from: dodgertc on May 15, 2018, 07:17:36 AM

Quote from: simbav on May 14, 2018, 11:07:54 PM

Quote from: subzverb on May 14, 2018, 08:45:33 PM

very buggy release. i am using hiveos. dstm 0.6.1.

1. gtx1080ti has hashrate around 200 sols
2. ping problem (already reported here before)

Same problem here... With gtx 1060, dstm 0.6.0 i get ~300 sol/s. Now with dstm 0.6.1 i get around 200 sol/s .
Whats wrong?
https://i.imgur.com/UKFqQvW.png

yes i can confirm that.

are those AMD machines ? i have the same effect on 2 other of these cheap AMD machines, but on the modern intel machine with gigabyte D3A H110 it has no issues and the 0.6.1 performs slightly better.

this is with 0.6 (and its even warm).

Code:

GPU1 56C Sol/s: 491.0 Sol/W: 4.33 Avg: 487.8 I/s: 261.2 Sh: 0.39 0.99 116
GPU0 60C Sol/s: 710.1 Sol/W: 3.58 Avg: 715.4 I/s: 383.2 Sh: 0.58 1.00 112
GPU3 60C Sol/s: 489.1 Sol/W: 4.33 Avg: 487.8 I/s: 261.2 Sh: 0.40 1.00 113
GPU2 52C Sol/s: 493.4 Sol/W: 4.36 Avg: 490.8 I/s: 262.8 Sh: 0.43 0.99 112
GPU4 61C Sol/s: 740.6 Sol/W: 3.68 Avg: 732.8 I/s: 392.4 Sh: 0.63 0.99 112
========== Sol/s: 2924.2 Sol/W: 4.06 Avg: 2914.7 I/s: 1560.8 Sh: 2.41 0.99 113

this is with 0.6.1 just started (so would get lower in a bit)

Code:

_ GPU0 58C 80% | 678.2 Sol/s 678.2 Avg 364.9 I/s | 3.44 S/W 202 W | 0.00 . .
_ GPU1 55C 80% | 474.4 Sol/s 474.4 Avg 254.7 I/s | 4.22 S/W 117 W | 0.00 . .
_ GPU2 50C 80% | 476.2 Sol/s 476.2 Avg 253.9 I/s | 4.31 S/W 104 W | 0.00 . .
_ GPU3 58C 80% | 462.7 Sol/s 462.7 Avg 249.3 I/s | 4.15 S/W 110 W | 0.00 . .
_ GPU4 58C 80% | 747.1 Sol/s 747.1 Avg 402.5 I/s | 3.78 S/W 179 W | 2.99 100 113
============== | 2838.7 Sol/s 2838.7 Avg 1525.3 I/s | 3.98 S/W 713 W | 2.99 100 113

hwinfo: (its obviously one of my low ROI machines where i use an older downclocked energy save cpu, mb + mem in combination with a 1to4 pci extender. works flawlessly though. its 2x 1080ti 3x1070ti config. OS is SmOS.

Code:

Linux simpleminer 4.11.12-041112-generic #201707210350 SMP Fri Jul 21 07:53:15 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux

Code:

Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 2
Core(s) per socket: 2
Socket(s): 1
NUMA node(s): 1
Vendor ID: AuthenticAMD
CPU family: 21
Model: 48
Model name: AMD A8-7600 Radeon R7, 10 Compute Cores 4C+6G
Stepping: 1
CPU MHz: 1400.000
CPU max MHz: 2800.0000
CPU min MHz: 1400.0000
BogoMIPS: 4990.45
Virtualization: AMD-V
L1d cache: 16K
L1i cache: 96K
L2 cache: 2048K
NUMA node0 CPU(s): 0-3

cheers

as inquired the cpu usage of 0.6 and 0.6.1 related to above findings.
0.6.1 has higher peaks ie i see it peak to up to 50% cpu usage at least using "top".

0.6

Code:

Tasks: 162 total, 2 running, 160 sleeping, 0 stopped, 0 zombie
%Cpu(s): 8.4 us, 10.5 sy, 0.0 ni, 81.0 id, 0.0 wa, 0.0 hi, 0.1 si, 0.0 st
KiB Mem : 3963096 total, 2444388 free, 1108500 used, 410208 buff/cache
KiB Swap: 0 total, 0 free, 0 used. 2497384 avail Mem

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
4087 miner 20 0 64.963g 588996 434516 S 40.2 14.9 1155:28 zm

0.6.1

Code:

Tasks: 169 total, 2 running, 167 sleeping, 0 stopped, 0 zombie
%Cpu(s): 9.8 us, 22.1 sy, 0.0 ni, 68.1 id, 0.0 wa, 0.0 hi, 0.1 si, 0.0 st
KiB Mem : 3963096 total, 2464964 free, 1085700 used, 412432 buff/cache
KiB Swap: 0 total, 0 free, 0 used. 2519828 avail Mem

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
14325 miner 20 0 67.005g 567988 434928 S 40.5 14.3 0:31.95 zm