Quote from: aneutronic on November 27, 2013, 09:30:32 AM

Quote from: Distribution on November 25, 2013, 12:03:59 AM

Thanks. That's what I figured. I looked at the modules to see if I could see a failed capacitor, but I was unable to find any noticeable signs of failure.

I assume that the numbers on the top correspond with the numbers of modules. So I figured the problem was at P14. I don't know how accurate that is. If that is the case, here's an album of that section. Maybe someone else can pick out an anomaly. I also took off that metal plate and looked to see if I could spot a burnt up ASIC chip.

EDIT: Also, sometimes [match_work_count14] => 0 will not be zero, implying that maybe it works sometimes. But the number is always magnitudes lower than the others.

Finally, it's been running for a couple days now on --avalon-auto without problem. So I haven't seen the red LED or any shutdowns.

I didn't notice any burnt caps in your photos either. It must be some other component with an intermittent problem.
I wouldn't worry about it for now as long as it keeps running. It wouldn't be worth the down-time to find the problem at this point in time.

Thanks for the reply. I don't know what's going on. Now one of the other modules (#8) is showing that it's doing about half the work as the others. My fear is that it's too hot. But thanks for looking.