Quote from: slon_ru on November 27, 2013, 05:39:31 PM

БП сгорел и внутри коробки чето жахнуло. Поставил другой бп на 12В\8мА - крутится, мигает, но комп ее больше не алле.

8mA - вы ничего не путаете?

Вопрос к поршивальщикам Жополен (в bfgimner'e есть даже прошивалка - bitforce-firmware-flash)

У меня две разные ЖЛ и bfgminer их видет по разному:
[2013-11-28 13:20:54] Accepted 0d83e98f BFL 0d pool 0 Diff 18/16 (новая)
[2013-11-28 13:21:53] Accepted 072984c8 BFL 0h pool 0 Diff 35/16 (новая)
[2013-11-28 13:20:55] Accepted 01f1b146 BFL 1 pool 0 Diff 131/16 (старая)

т.е. получается каждый чип имеет код 0d и 0h.

[2013-11-28 12:27:37] BFL: Attempting to open /dev/ttyUSB1
[2013-11-28 12:27:37] BFL: Attempting to open /dev/ttyUSB0
[2013-11-28 12:27:37] Found BitForce device on /dev/ttyUSB0
[2013-11-28 12:27:37] Found BitForce device on /dev/ttyUSB1
[2013-11-28 12:27:37] DEVICE: BitFORCE SC
[2013-11-28 12:27:37] FIRMWARE: 1.2.9
[2013-11-28 12:27:37] IAR Executed: NO
[2013-11-28 12:27:37] CHIP PARALLELIZATION: YES @ 2
[2013-11-28 12:27:37] QUEUE DEPTH:40
[2013-11-28 12:27:37] PROCESSOR 3: 16 engines @ 262 MHz -- MAP: FFFF
[2013-11-28 12:27:37] PROCESSOR 7: 11 engines @ 256 MHz -- MAP: CFF4
[2013-11-28 12:27:37] THEORETICAL MAX: 7008 MH/s
[2013-11-28 12:27:37] ENGINES: 27
[2013-11-28 12:27:37] FREQUENCY: 291 MHz
[2013-11-28 12:27:37] CRITICAL TEMPERATURE: 0
[2013-11-28 12:27:37] TOTAL THERMAL CYCLES: 0
[2013-11-28 12:27:37] XLINK MODE: MASTER
[2013-11-28 12:27:37] XLINK PRESENT: NO
[2013-11-28 12:27:38] DEVICE: BitFORCE SC
[2013-11-28 12:27:38] FIRMWARE: 1.0.0
[2013-11-28 12:27:38] MINIG SPEED: 7.28 GH/s
[2013-11-28 12:27:38] PROCESSOR 3: 14 engines @ 277 MHz
[2013-11-28 12:27:38] PROCESSOR 7: 13 engines @ 264 MHz
[2013-11-28 12:27:38] ENGINES: 27
[2013-11-28 12:27:38] FREQUENCY: 266 MHz
[2013-11-28 12:27:38] XLINK MODE: MASTER
[2013-11-28 12:27:38] CRITICAL TEMPERATURE: 0
[2013-11-28 12:27:38] XLINK PRESENT: NO
[2013-11-28 12:27:39] BFL 0a: Set temperature config: target=89 cutoff=95
[2013-11-28 12:27:39] BFL 0b: Set temperature config: target=89 cutoff=95
[2013-11-28 12:27:39] BFL 0c: Set temperature config: target=89 cutoff=95
[2013-11-28 12:27:39] BFL 0d: Set temperature config: target=89 cutoff=95
[2013-11-28 12:27:39] BFL 0e: Set temperature config: target=89 cutoff=95
[2013-11-28 12:27:39] BFL 0f: Set temperature config: target=89 cutoff=95
[2013-11-28 12:27:39] BFL 0g: Set temperature config: target=89 cutoff=95
[2013-11-28 12:27:39] BFL 0h: Set temperature config: target=89 cutoff=95
[2013-11-28 12:27:39] BFL 1 : Set temperature config: target=89 cutoff=95

- Есть ли смысл обновлять прошивку?
- Правильно я понимаю, что ENGINES: 27 = 7Ghas/s (1.0.0 - покупал upgrade, но в декларации не было записанно его, а 1.2.9 по ходу расширили на халяву)