Quote from: techman05 on November 29, 2013, 02:21:31 PM

Quote from: Barntech on November 29, 2013, 12:22:32 PM

Hey Guys.

Most of the packages have been sent. My very lovely helpful girlfriend and i have been furiously testing and packaging boards for the last 24 hours straight. Unfortunately we didn't get through them all, but the last few will be sent on Monday. Good news is the boards are all hashing reliably around 20 GH/s on stock settings and can be pushed from there there with overclocking! Grin

There are a few peculiarities they we have been struggling to work out and troubleshoot. Most importantly, the miniplane code is not working yet. The guys are working on it now that they have a fully stacked one to test on and hopefully will have a firmware update soon that will sort it out. It's nice and easy to update firmware, basically there is a button on the board that you hold in while powering it up to start it in bootloader mode, then you run an executable. What this means is for now you will have to connect each board by its own USB cable. You all have one per boards, and very sexy ones at that.

Now, the part that gets really weird and annoying, and we haven't properly diagnosed this yet, is if you connect more than 2 boards in a USB hub, things start to get very unstable, the hubs don't like it. Right now, the best possible configuration which works entirely stably is to connect each board to its own USB port on your computer. I know this will be a pain if you have a lot of boards, and by all means, feel free to play around, but i know that this will work. Hopefully we'll have this firmware update soon and all this won't be an issue any more.

Ok, some other things. There are legs and spacers in each package. Unfortunately the smaller bolt things in the U.S. packages are the wrong size so you guys will need to go buy some extra bits to hold it all together properly. All other others have been sorted with all the bits and pieces you need to make a nice solid block with your setup. I'll post some photos of how it all holds together soon but it shouldn't be too hard to figure out.

The fan connectors on the miniplanes and double scrolls have been put on backwards so you will need to turn the connector around and push the little plastic bit out, then it will work, or alternatively you could just snap that little plastic bit off if you want to.

The little heatsinks are for the mosfets, the 3 square guys in a row near the molex connector, apply the middle one first and then the one on each side. this will help with the thermal dissipation of the power supply.

Ok thats about it. You will all have your boards very soon. Enjoy!

Pics and extra bits coming soon.

Barntech

So I have to do without the backboard for now till updates but any idea if you have an end game plan to send out a new backplane with the fan pins in the right spots and some good links to local stores so I don't have to confuse home depot looking for screws. My sylvania tv taught me all screws are not the same when I installed my xbox 360 connect.

/e scratches his head... "What open ports ;("

I don't need powered ports as long as I find a way to get the board power right[I hope]?

Ace Hardware has a better selection of smaller threaded stuff....or Radio Shack MAY have some too Wink