Quote from: dnssandbox on May 20, 2018, 12:08:46 AM

Quote from: Mo20 on May 19, 2018, 11:22:27 PM

Quote from: Andartis on May 19, 2018, 10:34:41 PM

Did that update. I can not set fanspeed

Yep you can't set fan speed. However, you can see current fan speed after the update.

you CAN set fan speed. there is an easy and a permanent way by using SSH.
Here is the Easy Way
1.
Use FireFox Browser or Safari if you have a MAC
go to the D3 Miner Configuration/General Settings, screen
Use the inspector to find #fan_control
change "display:none" to "display"

Once that is changed, it will display that Fan option and you can easily change the setting to whatever you want.
I changed mine to 55%
My fans are running at 3960, and my temps are 36-40.
I could have easily gone lower, but my fans are so much quieter now that I don't need to. Even after rebooting, my fan settings stay.

i didn't post the permanent way because I don't want to be responsible for anyone bricking their unit if they aren't familiar with SSH

Update bmminer.conf with SSH as follows:

.....

"api-allow" : "A:0/0,W:*",
"bitmain-fan-ctrl" : true,
"bitmain-fan-pwm" : 65",
"bitmain-use-vil" : true,
"bitmain-freq" : "_ant_voltage=0706",
"bitmain-voltage" : "0706",
"multi-version" : "1"
}