@doktor83. Is there a virtual memory requirement or free ssd/hdd space requirement when compiling the kernels and copying over the device?
Virtual mem is same as for every other Cryptonight miner(the more, better
) , kernel compile happens on GPU, after that it's written to the hdd, miner directory, and it takes up approx 2.1-2.3mb / binary.Or what was your question ?
Cause this is weird behavior I observed today. Same I/W/T settings 59/8/1 on 4gb RX 570 which was working fine. Restarting the miner it gave the error related to below error message,
https://i.imgur.com/TqAdUMm.png
sometimes drivers or windows behaves strange, i bet if you delete the .srb files and reboot it will all be good.
Nope deleting the .srb file didn't solve it. Rebooting did. it seems more like a driver/miner didn't clean up memory properly?
probably. these kind of 'errors' happen a lot after driver crash/recovery.
Invalid buffer size usually means you're trying to use an intesity that is too high for the card. Happens often on CN-Heavy coins. That's probably the case since you're using 4GB cards.
Is that so? Check my post again. I mentioned it was working and didn't work later during relaunch.
Too lazy to take another screenshot but here are 6 x 4gb card doing the same settings on CNH. Anyways, I got the RX570's running at 59 intensity too.
https://i.imgur.com/lavRfGo.jpg
I mine with 59.5 intensity with rx's 570 4gb, what i found is we have to increase virtual memory with 13 cards i have set 76 gb and all is fine.