Quote from: willycut on May 24, 2018, 01:00:50 AM

Quote from: heavyarms1912 on May 23, 2018, 10:11:44 PM

Quote from: wudafuxup on May 23, 2018, 10:07:15 PM

Quote from: doktor83 on May 23, 2018, 07:27:00 PM

Quote from: heavyarms1912 on May 23, 2018, 07:21:26 PM

Quote from: doktor83 on May 23, 2018, 07:17:50 PM

Quote from: heavyarms1912 on May 23, 2018, 07:13:37 PM

Quote from: doktor83 on May 23, 2018, 06:39:59 PM

Quote from: heavyarms1912 on May 23, 2018, 03:13:20 PM

@doktor83. Is there a virtual memory requirement or free ssd/hdd space requirement when compiling the kernels and copying over the device?

Virtual mem is same as for every other Cryptonight miner(the more, better Cheesy

) , kernel compile happens on GPU, after that it's written to the hdd, miner directory, and it takes up approx 2.1-2.3mb / binary.
Or what was your question ? Cheesy

Cause this is weird behavior I observed today. Same I/W/T settings 59/8/1 on 4gb RX 570 which was working fine. Restarting the miner it gave the error related to below error message,

sometimes drivers or windows behaves strange, i bet if you delete the .srb files and reboot it will all be good.

Nope deleting the .srb file didn't solve it. Rebooting did. it seems more like a driver/miner didn't clean up memory properly?

probably. these kind of 'errors' happen a lot after driver crash/recovery.

Invalid buffer size usually means you're trying to use an intesity that is too high for the card. Happens often on CN-Heavy coins. That's probably the case since you're using 4GB cards.

Is that so? Check my post again. I mentioned it was working and didn't work later during relaunch.
Too lazy to take another screenshot but here are 6 x 4gb card doing the same settings on CNH. Anyways, I got the RX570's running at 59 intensity too.
https://i.imgur.com/lavRfGo.jpg

I mine with 59.5 intensity with rx's 570 4gb, what i found is we have to increase virtual memory with 13 cards i have set 76 gb and all is fine.

Yup I know it works on 59.5 as well. Just that 59 is good enough for me.
It wasn't virtual memory. I have already figured out the reason and mentioned in my previous posts. Virtual memory is set fine and not even used. I have set it at 40GB which works fine (8 x 4GB + 1 x 8GB Nvidia).