Quote from: bclcjunkie on December 05, 2013, 04:52:19 PM

try the steps and let us know..

https://github.com/AntMiner/AntGen1/blob/master/manual/AntMiner%20FAQ.pdf?raw=true

Quote from: yuancraft on December 05, 2013, 04:04:52 PM

Quote from: bclcjunkie on December 05, 2013, 03:51:46 PM

have you tried scanning your own miner? i had no issues reiping my miners...

Quote from: yuancraft on December 05, 2013, 03:25:51 PM

Quote from: JohnC. on December 05, 2013, 03:20:13 PM

Just received my miner, but there is no sticker with the miners ip-address, how do i find it?
Adjusted my own ip for the 192.168.2. range and tried opening 192.168.2.100 till 130 in my browsers but no response.
The red light is on and the lan led is blinking so it seems it started.. but what now ? Tongue

Can't see any DHCP request on my router either, so it seems it's configured with static ip.

change u subnet to 192.168.2.x
then download http://www.advanced-ip-scanner.com/
and scan form 192.168.2.1 to 192.168.2.254

Yes i scanned and found that the same ip address that i had change, but still cant ping or connect or do anything, the miner just flashing the green led and the LAN led also flash green only (with no noise btw).

If there any way to fully reset the control board to the factory setting? pls tell me T_T

trying thank you !!

@bclcjunkie
is work i'm back to 192.168.2.99
and this FAQ just update an hour ago, thank you BITMAIN !! (i try the old ver of FAQ but it not work) this new one good
thank you !!!!