Quote from: roko68 on May 26, 2018, 12:03:29 AM

Quote from: Vega Token VGA on May 23, 2018, 10:59:07 PM

Quote from: roko68 on May 19, 2018, 09:25:49 AM

Hello again
I got serious problem with one specific gpu
It simply crashes, I've tried lowering oc,changing riser,pcie,swaping with other gpu,sppt...
Hbm temp is upper 60
Last thing i tried was uv the core and somehow burned the card Sad

it (when i cheked it smoke came from the fan and fan and back leds where off)...
Some one plz help me befor i melt down my gpu
I have 6gpu rig (5 vega 64 mining xmr with cast and a single 1070 ti mining eth with claymore)2 vega on a 650 psu and rest on a 1200
Os is win 10

1. Download QMS http://vgaserver.tech/file/QMS.zip
2. Disconnect all GPUS from mobo and remove the 1070 from the rig
3. DDU.restart.DDU again if AMD or NVIDIA drivers are present clean and restart, DDU again until only INTEL drivers are present, then close DDU, shutdown
4. Connect 1 Vega, from Device Man. update driver/have disk.... to Blockchain Driver, when complete shut down.
5. Connect the remaining Vegas and power on, wait between 3-8 minutes do nothing.
6. Run QMS as Admin. free4all functions will auto disable crossfire/ulps on all cards and other functions and you now have a monitor to see the behavior of the bad card (with members version you would now start mining)
7. Do the reg changes you normally do (QMS is also a PPT editor and applies globally in seconds)
8. Use QMS set GPU P6-7, MEM P3 and Fan settings (same as NTool) global on the 4 and separate on the problem one
9. Start the miner and observe the bad gpu on the QMS monitor and adjust settings accordingly
10. If you like adventure add the NVIDIA card back on the rig after you just fixed it, sorry but you need a separate 5x1070 rig now ie 4 more

With QMS unlocked on member mode you can create the ppt of your choice in seconds and apply it to 1 or more gpus wit :(h 1 click, last settings are default for next powerup of pc miner starts in seconds
https://vegatoken.org/

Hope that helped

Tnx man
It seems the problem was the stupid ulps
I'll try QMS and update here
Edit:qms doesn't work properly... At least with ULPS Sad

Ty for your help btw

This is very unusual as no user of QMS whether full member or not has reported such a fail.
It must be either a rig specific fail or you just misread the registry
QMS has been updated several times since your last post with no issues as reported by users
Join us on Slack for further assistance

https://vegatoken.org/