Quote from: ppettioooo on May 27, 2018, 05:15:33 PM

Quote from: iSuX on May 27, 2018, 04:56:18 PM

Quote from: ppettioooo on May 27, 2018, 04:40:58 PM

Hello guys, i have a problem, the cards are 1050ti 4gb, updated to latest drivers and latest claymore, tried changing virtual memory, but there is still problem. What to do? Thanks in advance!

CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

19:36:22:234   ab8   CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

19:36:22:240   1f48   CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

19:36:22:258   1f18   CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

19:36:22:295   1b30   CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

19:36:24:991   a58   Set global fail flag, failed GPU2
19:36:24:999   a58   GPU 2 failed
19:36:24:998   1fec   Setting DAG epoch #189 for GPU2
19:36:25:010   1fec   GPU 2, CUDA error 11 - cannot write buffer for DAG

19:36:25:241   ab8   Set global fail flag, failed GPU0
19:36:25:247   ab8   GPU 0 failed
19:36:25:254   af0   Setting DAG epoch #189 for GPU0
19:36:25:251   1f48   Set global fail flag, failed GPU4
19:36:25:266   1f48   GPU 4 failed
19:36:25:277   af0   GPU 0, CUDA error 11 - cannot write buffer for DAG

19:36:25:272   1f18   Set global fail flag, failed GPU5
19:36:25:289   1f2c   Setting DAG epoch #189 for GPU4
19:36:25:305   1f2c   GPU 4, CUDA error 11 - cannot write buffer for DAG

19:36:25:311   1e08   Setting DAG epoch #189 for GPU5
19:36:25:305   1b30   Set global fail flag, failed GPU3
19:36:25:326   1b30   GPU 3 failed
19:36:25:337   1e08   GPU 5, CUDA error 11 - cannot write buffer for DAG

19:36:25:343   1f18   GPU 5 failed
19:36:25:350   1ff0   Setting DAG epoch #189 for GPU3
19:36:25:360   1ff0   GPU 3, CUDA error 11 - cannot write buffer for DAG

19:36:25:394   1ff4   buf: {"id":0,"jsonrpc":"2.0","result":["0x8cc05aa8be75170e0cf74ab6ac892516828e014b33e2ece87efcf493ff753f1d","0x7bb6f14a940828054edc1aa9ec9f31e274e036a730709926e1f2900225e2f745","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x56c530"]}

19:36:25:403   1ff4   ETH: 05/27/18-19:36:25 - New job from eu1.ethermine.org:4444
19:36:25:407   1ff4   target: 0x0000000112e0be82 (diff: 4000MH), epoch 189(2.48GB)
19:36:25:414   1ff4   ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
19:36:25:423   1ff4   ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
19:36:28:018   1fec   Set global fail flag, failed GPU2
19:36:28:023   1fec   GPU 2 failed
19:36:28:289   af0   Set global fail flag, failed GPU0
19:36:28:294   af0   GPU 0 failed
19:36:28:312   1f2c   Set global fail flag, failed GPU4
19:36:28:322   1f2c   GPU 4 failed
19:36:28:344   1e08   Set global fail flag, failed GPU5
19:36:28:351   1e08   GPU 5 failed
19:36:28:367   1ff0   Set global fail flag, failed GPU3
19:36:28:376   1ff0   GPU 3 failed

Hey there, by any chance, are you dual mining?
BTW 3GB cards can't mine ETH any more, and probably, given time, 4GB will go the same way, but at least right now, 4GB cards are ok.
Things to check, Nvidia driver, (cuda) install ok, or DDU, and clean install Nvidia drivers.

Post your batchfile content, it's helpful to get a better understanding about your rig and expectations.
Also, how much VM are you running?

I am running 16000 MB VM, i am not dual mining, the cards are 4gb, i have another rig same exact configuration and it is working well. I did a clean installation on drivers and still no progress...
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal xxx.Mechanic -epsw x -esm 0 -mode 1 -wd 1 -r 1 -dbg 0 -ethi 16

Today I had the same problem with 6 GPU Nvidia 1060 6GB, my solution it was increase the VM to 25 GB