Quote from: polymorpher on July 23, 2011, 02:45:09 PM

Quote from: Xephan on July 23, 2011, 02:16:16 PM

Quote from: polymorpher on July 23, 2011, 02:06:27 PM

My PSU refuses to provide power to GPUs if 24pin and 8pin cable are not connected to motherboard. Is there anyway to trick the PSU so I could have a dedicated PSU for GPUs?

ATX PSU are turned on when Pin 14 on the 24pin connector is pulled to ground. Pin 14 is usually wired with a green wire. So the simplest way to make this work, you just need to use a wire or something to connect that to any ground pin (black wire). A better way is to connect it to your main PSU so that it will turn on/off accordingly as well.

Many thanks. Do you mean I can connect the "power on" pin to a ground pin on the same 24 pin connector (or any ground pin on any component)? I know nothing about PSU. Just want to make sure it is safe, so I wouldn't short circuit my PSU.

You can connect the 24pin to any ground pin, there are pull down resistors to prevent shorts. Anyway you can find guides online like this
http://www.overclock.net/faqs/15751-info-can-i-use-two-power.html