Quote from: nokia5556 on June 07, 2018, 05:59:03 AM

Quote from: 7h3235 on June 06, 2018, 04:13:11 AM

Hi, I'm using it right now with the Claymore v11.8

I've tried to use it with the OC Profiles, but it caused only problems to me. And even after I'd remove all the OC Profiles, they were still being loaded, also, it is showing a OverdriveNTool message:

" = is not a valid Pstate number

or something like that, each time the miner was restart.

This also caused another problem, the fans ate stuck at 70% when mining. It appears that is something related with the OverdriveNTool, but, I could not find out where it stores this config, because, even after delete the files, it was still showing the errors and keeping the fan speed. I configured the Radeon Wattman with greater fan speeds, and even that did not change the fan speeds.

PS: After delete everything, local and on website, and rebuild the configs, it stoped to inform the pstate invalid values messages, and now the commands appears to be OK, but, the fans are stuck at 70%

PS2: The fans are now with higher speeds. But the temp is a bit higher than what used to be.

Hello,

Fixed pstate issue problem, it was happening when core state is empty in OC profile/custom oc list. Can you try this version.
https://github.com/JamesSmith2/EthControl/releases/tag/0.0.20_1018

Hi there!
Latest version with Claymore v11.8 in execution, results:
- No messages or any other errors were shown during the load.
- Three GPUs found, parameters given in the command applied successfully for each GPU.
- FANs rotations applied accordingly to the configurations of Wattman.

So far, great job!