Quote from: guz74 on June 08, 2018, 10:55:13 PM

Quote from: skinnyfalcon on June 08, 2018, 08:34:11 PM

Quote from: guz74 on June 06, 2018, 04:02:21 PM

Hi to all, I have a little problem with phenixminer, I try 3.0a , b and c

Actually I use claymore with mi rig ( 5x rx580 8gb) and the hashrate for any card is about 31.2 to 32 mh/s with a consumption about 87w for card with driver amd for blockchain; card are not flashed, original bios

Sorry but there is absolutely no way you are getting 31-32 MH/s at 87W with factory bios on a 580. as a matter of fact you couldn't get 25 without flash.

no, is absolutely possible, instead of flash bios I add this parameter in phoenix comand line: -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 950. Seeing is believing

In my rig, only 1 of 6 card is flash with custom bios (my first card Grin

) , and I do not know why, this card consumes 105w

Well I bet you are seeing the consumption of energy through software... I bet 1 eth if you measure at the wall you'll see around 700-800watts maybe more...