Quote from: heavyarms1912 on June 12, 2018, 01:31:27 PM

Quote from: MaxMidnite on June 12, 2018, 07:15:06 AM

Quote from: heavyarms1912 on June 12, 2018, 01:22:53 AM

Quote from: Steak12 on June 11, 2018, 04:08:20 PM

Quote from: heavyarms1912 on June 11, 2018, 02:21:29 PM

You need good timing straps to reach 1k+ on CN-V7. 8gb cards can do 1k+ on CN-Heavy easily.
I have also got 1260 H/s on an RX 570 8gb card (1466/2300 clocks). They do 1140 H/s @ 1250/2240 clocks and 900mV core (105w from wall). So it's pretty much possible.

Also, All 4gb cards that I have Elpida, Hynix do 1k+ on CN-V7.

I want to see that...
Can't get more that 700h/s with Elpida 570 pulse 4gb (with stak and SRB)

RX570 8gb 1260 H/s on CN-Heavy (i posted this some pages back)

6 x RX580 4gb cards + 1 RX570 8gb (GPU4).
https://i.imgur.com/VQl9Hxz.jpg

Ok this is very nice but a few questions:

- What mother board you use?
- How do you overclock your bios? and what overclocking tool you use?
- To confirm your GPU 1250mhz/900mv Power Memory: 2020mhz /900mv?

Im not jealous of your results but similar cards and spent days tweaking it and cannot break 1000
My memory is Micron and Hynix.

Motherboard doesn't matter - cause I use two separate asus z170p and z170a boards and results doesn't change.
I don't overclock in BIOS. I use ODN tool. All states except P7 and P2 are disabled.
Each GPU is different some need 912 mV at 1250 while some are okay with 875-887 mV on core. I usually keep P2-mem 887 or lower.

Notes:
Whenever I set 912mV on core and 887 on mem the actual core voltage hovers in between 887-912. more likely at 900mV.
You need good timing staps else you would require very high OC to cross 1k.

Quote from: UnclWish on June 12, 2018, 06:17:36 AM

And what parameters (intensity) you use?

SRB miner specific
Intensity 59 and dual threads. 8gb card at 116/118.

Thanks man, will check this out, i used polaris auto timing straps, maybe this my issue