Quote from: MrTeal on December 22, 2013, 12:49:06 AM

Quote from: GrapeApe on December 22, 2013, 12:02:01 AM

I'm having similar issues as well. The 2 I got from batch 3 auction will reset constantly. The voltage gets up to 1.16 and then they disable themselves. If by chance the voltage stays below 1.16 all is well but it's a crap shoot. I have heat sinks on the MOSFETs.

EDIT:Forgive but how do I limit the voltage I'm using a self compiled cgminer 3.8.5 (ubuntu) I don't see device management it used to be there.

As of right now there isn't an option to limit voltage. Below is a version of 14e compiled to limit the voltage to 1.1V instead of 1.15V. Give that a try.
https://www.dropbox.com/s/i4rj2k1m9vrj00e/Chili14e1V1.hex

Over the break for the next couple weeks I plan to get some changes to the firmware done to allow limits to be imposed on different variables like frequency setpoint and voltage through command extensions.

BTW- Not super useful for most people since you can't use it while hashing since the mining software has the port open, but the ZlX command (lowercase "L") will return the temperature of all the chips. If you're compiling your own cgminer, you might want to add in a way to read that.

This is a Linux house no windows here. Is there a way to flash the firmware using Ubuntu?

Edit: Had to partition a space on the drive and install xp (aaarrggg) got them flashed and took a small hit on the hash rate but they are running. Thank You

Sorry for asking you to hold my hand Mr.Teal and thanks for uploading the modified firmware. I look forward to being able to tweak these settings myself thanks again.