Quote from: Kejvu on June 29, 2018, 12:56:44 PM

Quote from: RoninAlek on June 29, 2018, 02:05:44 AM

Quote from: Kejvu on June 28, 2018, 11:36:36 PM

Quote from: RoninAlek on June 28, 2018, 10:48:45 PM

Quote from: Kejvu on June 28, 2018, 04:29:46 PM

Hello all, i have 1 GTX 1080Ti that i bought for gaming and when i heard about mining i got another 1060. Can you guys tell me do you have some mouse lag aftersome time using PC and mining same time? On Claymore i had even when i turn off miner, its so lagging across screen i cant use pc. need to reset it?

I dont care for few mh/s less if i need to do something, already lowered OC.

What are you mining? If you are mining Ethash, your PC should lag a little. You can keep the 1060 as your miner and your 1080ti as your main display, should not see lag. You should see no lag if you are not even mining. Check your overclock again.

i dont have anylag with this miner.

my oc is for 1060 ( 400 on memory )
for 1080Ti is 500 on Memory, just that.

Using booster for GTX 1080Ti but i didnt specify for with GPU, do i need to speficy that booster that gives 50+ mh/s to 1080ti?
On Claymore i had some crashes but Bminer is good for me now. testing it still. I prefer stability over few more mh/s or whatever i'm mining.

For your 1060, get it to 4400 MHz total. If it's a regular none overclocked card, it will be about 600 to memory. Should give you 23-25 mh/s 70%-75% power.
For your 1080ti you must use the boost "pill" as mining Ethash it will give you a huge bump. You don't need to specify which GPU you boost as it only works on 1080ti and Titan xp (plays with memory clocks).

Get your 1060 to 1950-1999 Core and 4400 Mem *Total*
Your 1080ti should be 6000-6100 *Total*

Let me know if this works.

i dont see any difference.
1060 is core clock 0
mem clock +600
Power limit is 85%

1080Ti
core 0
mem +500. Getting around 50 mh/s with pill.
Power 85%

using MSI Afterburner

Those settings are good. If you are going to game with your 1080, just turn it off for mining. Also make sure your primary display is set for your 1080. You will always have a little lag as your GPUs are at 100%. You can try going to 100% power on your 1080 and see if it improves. If you are using MSI to overclock, have it configured and reboot your machine. Do not open it again, sometimes there is a bigger lag spike after you open MSI and the only way to clear it is after a clean reboot.