Re: LinuxCoin A lightweight Debian based OS with everything ready to go.

Quote from: CyberPhunk on July 30, 2011, 04:09:07 AM

Hmm, trying to use Linuxcoin, but having a problem

Followed the guide here to the letter.

When I reboot, it looks like it's going to start up, but then shuts down AMDOverdriveCtrl windows and nothing happens.

I tried to run the startminers.sh solo, and I get this, whether I type sudo or not:

Code:

root@linuxcoin:/usr/local/bin# sudo startminers.sh
ATI Overdrive(TM) enabled
/usr/local/bin/startminers.sh: line 6: ./phoenix.py: Permission denied
INF: Nr. of Adapters: 6
INF: Nr. of Adapters: 6
INF: Adapter index: 0, active, ID:12199712, ATI Radeon HD 5800 Series
INF: Adapter index: 0, active, ID:12199712, ATI Radeon HD 5800 Series
INF: Adapter index: 1, inact., ID:12199712, ATI Radeon HD 5800 Series
INF: Adapter index: 2, inact., ID:12199712, ATI Radeon HD 5800 Series
INF: Adapter index: 1, inact., ID:12199712, ATI Radeon HD 5800 Series
INF: Adapter index: 3, active, ID:12813008, ATI Radeon HD 5800 Series
INF: Adapter index: 2, inact., ID:12199712, ATI Radeon HD 5800 Series
INF: Adapter index: 3, active, ID:12813008, ATI Radeon HD 5800 Series
INF: Adapter index: 4, inact., ID:12813008, ATI Radeon HD 5800 Series
INF: Adapter index: 5, inact., ID:12813008, ATI Radeon HD 5800 Series
INF: Adapter index: 4, inact., ID:12813008, ATI Radeon HD 5800 Series
INF: Adapter index: 5, inact., ID:12813008, ATI Radeon HD 5800 Series
INF: Adapter index 3 choosen.
INF: Adapter index 0 choosen.
INF: Nr. of Performance Levels: 3
INF: Card's default Perf Level 0: GPU 157MHz Memory 300MHz Voltage 0.968V
INF: Card's default Perf Level 1: GPU 550MHz Memory 900MHz Voltage 1.068V
INF: Card's default Perf Level 2: GPU 725MHz Memory 1000MHz Voltage 1.118V
INF: Nr. of Performance Levels: 3
INF: Card's default Perf Level 0: GPU 157MHz Memory 300MHz Voltage 0.968V
INF: Card's default Perf Level 1: GPU 550MHz Memory 900MHz Voltage 1.068V
INF: Card's default Perf Level 2: GPU 725MHz Memory 1000MHz Voltage 1.118V
ACT: Set fan speed to default
ACT: Set fan speed to default
INF: Nr. of Displays to check 4
INF: Color temp disp(2) :
INF: current 6500K default 6500K
INF: min 4000K max 10000K step 100K
WRN: color temperature setting not supported.
INF: Nr. of Displays to check 4
WRN: color temperature setting not supported.
ACT: Set fan speed to default
INF: FanCtrl mode off
ACT: SetOverdriveValues: Level 0: 157MHz, 300MHz, MHz, 0.968V
ACT: SetOverdriveValues: Level 1: 550MHz, 425MHz, MHz, 1.068V
ACT: SetOverdriveValues: Level 2: 875MHz, 425MHz, MHz, 1.118V
INF: Default profile found and loaded.
ACT: Set fan speed to default
INF: FanCtrl mode off
ACT: SetOverdriveValues: Level 0: 157MHz, 300MHz, MHz, 0.968V
ACT: SetOverdriveValues: Level 1: 550MHz, 425MHz, MHz, 1.068V
ACT: SetOverdriveValues: Level 2: 875MHz, 425MHz, MHz, 1.118V
INF: Default profile found and loaded.
root@linuxcoin:/usr/local/bin# /usr/local/bin/startminers.sh: line 8: ./phoenix.py: Permission denied

startminers.sh:

Code:

#!/bin/bash
sudo aticonfig --od-enable
sudo AMDOverdriveCtrl -i0 &
sudo AMDOverdriveCtrl -i3 &
cd /opt/miners/phoenix/
./phoenix.py -u http://Cyberphunk.priory:pw@api2.bitcoins.cz:8080 -k p$
sleep 2
./phoenix.py -u http://Cyberphunk.secunda:pw@api2.bitcoins.cz:8080 -k $

Help?

You may want to verify that phoenix.py is executable

Code:

sudo chmod +x /opt/miners/phoenix/phoenix.py