Quote from: batt01 on December 29, 2013, 04:59:37 PM

Quote from: kern on December 26, 2013, 12:37:17 AM

Great discussion! I have learned alot about this cube I just got and am trying to get setup. My problem is that my router is a Netgear WNDR3400v2 and every device on my home network has an IP address something like 10.0.0.1 and to make matters worse when I am on the status page of the router it recognizes all the devices on the network with the exception of the cube. Anyone else have experience with the Netgear network?
Thanks,
Kern

Best solution is to game your Netgear router to 192.168.1.1. If you have any devices on your network with static addressed, you will need to change them to the new gateway range. I all your devices are dhcp, one little change and you're done.
Alternately you could change the ip address of the cube, but the simple solution is just to change the gateway address of the router.

My netgear router is also set to 10.0.0.1 and my cubes are set to 10.0.0.81 - 84 and work just fine. Usually netgear routers will change their IP address from 192.168.1.1 to 10.0.0.1 if they are behind another router on the network to prevent any conflicts. You can always hit the factory reset on the router if you want or manually change it back if you would like.