Quote from: KNK on December 29, 2013, 06:01:03 PM

There are few things you need to change for BFSB hardware:
in bitfury-config.h

Code:

#define BITFURY_MAXBANKS 8
#define BITFURY_BANKCHIPS 14

should be

Code:

#define BITFURY_MAXBANKS 4
#define BITFURY_BANKCHIPS 64

as there are 4 banks of 4 boards, each with 16 chips

Then in tm_i2c.c you need to comment out (ore remove) the line

Code:

#define BF_OE_ACTIVE_LOW

and to change the bank definitions (bf_bank_gpio) to the ones for BFSB i.e.

Code:

static const int bf_bank_gpio[BITFURY_MAXBANKS] = {18,23,24,25};

Allright, now it's working, thanks. Speed average 151 GH/s with the default chip speed of ~~42 i assume? How does this setting correlate to setting 54 in best.cnf for example?~~ 54, scrolled down on the code Roll Eyes

Also i got the segfault by trying to set --bitfury-clockbits 0:55,1:55,2:55... etc. Seems the arg parsing fails? I do have ulimit set to unlimited, but all i get is this:

Code:

[2013-12-29 20:16:06] BITFURY slot: 3, chip #69 detected
[2013-12-29 20:16:06] BITFURY slot: 3, chip #70 detected
[2013-12-29 20:16:06] BITFURY slot: 3, chip #71 detected
[2013-12-29 20:16:06] BITFURY slot: 3, chip #72 detected
[2013-12-29 20:16:06] BITFURY slot: 3, chip #73 detected
[2013-12-29 20:16:06] BITFURY slot: 3, chip #74 detected
[2013-12-29 20:16:06] BITFURY slot: 3, chip #75 detected
[2013-12-29 20:16:06] BITFURY slot: 3, chip #76 detected
[2013-12-29 20:16:06] BITFURY slot: 3, chip #77 detected
[2013-12-29 20:16:06] BITFURY slot: 3, chip #78 detected
[2013-12-29 20:16:06] BITFURY slot: 3, chip #79 detected
[2013-12-29 20:16:06] BITFURY: 80 chips detected!
[2013-12-29 20:16:06] Probing for an alive pool
[2013-12-29 20:16:07] Pool 0 difficulty changed to 512
[2013-12-29 20:16:08] Pool 0 difficulty changed to 64
/home/pi/bin/_cgminer: line 30: 18301 Segmentation fault ${CGMINERBIN} $PARAMS $1 $2 $3 $4 $5 $6 $7 $8 $9

I'm running cgminer through shell scripts, should i run it directly to get the coredump?