Quote from: taserz on July 25, 2018, 08:54:17 AM

The 8.8v right now is running the best on the bitmain 1600w PSU.

For the S9i I would try 800Mhz and see what temps your getting should be 90-100c. This will be like a 20% boost

For the 13.5 I would Try 725Mhz.

For the 14th I would try somewhere between 725 and 800mhz and check your hw errors and see what runs best once warmed up.

If your machines power off and don't reboot unplug the psu for a little bit. That means it drew to much power and the psu went into protect mode so lower the frequency if that happens although I have not had that issues with 8.8v only 8.9v and 9v on the 1600w.

Download: https://github.com/taserz/S9-Volt-Rocket-Ship/raw/master/bmminer9v
Download: https://github.com/taserz/S9-Volt-Rocket-Ship/raw/master/bmminer880

The first firmware 9 volts. The second 8.8 volts. Right? At what frequencies from 650-800?
Where in the KernelLog it is shown that ASIC start with the right voltage?