Quote from: GandalfG on January 07, 2014, 10:27:25 AM

Quote from: kano on January 06, 2014, 07:10:10 PM

Quote from: GandalfG on January 06, 2014, 06:43:04 AM

I am looking for an alternative to chainminer and its proxy.
Whats software are best for BFSB hardware ? BFGminer or CGMiner, other alternatives

Do CGMiner has been running stably Bitfury?
Is formed instruction on how to run CGminer on RasperryPi?

If you have BitFury boards, with a V1 or V2 controller, I've updated the driver in my git and it should work with either now.
https://github.com/kanoi/cgminer

I've tested it on BlackArrow hardware.
One V2 controller with 1 board, the other V2 controller with 6 boards: 3onSPI1, 2onSPI2, 1onSPI3.

Both work fine.

I, however, use Arch coz I find it more reliable on the RPi.

Getting cgminer on an RPi
http://www.kano-kun.net/?p=87

Thx Kano for link to detailed instruction. But its want work with standard Bitfury hardware. I mean M-Board and H-board from Bitfury shops.
If compile with BlackArrow support report "BlackArrowBitFuryGPIO failed to open spidev (2)"
I test it with scope today evening.

Well, device setup and detection is done pretty much the same as chainminer.
So no idea why you'd get that error.
2 means the spi device doesn't exit - so probably modprobe failed.
Though (like chainminer) I require root privs to setup the device.