Quote from: rostbiffen on January 07, 2014, 09:23:48 PM

This is how i did to get antminer U1 USB to work with minepeon

1 INSTALL MINEPEON

1.1 download minepeon from sourceforge:
http://sourceforge.net/projects/minepeon/files/release/

1.2 install minepeon to the SD-card. i used RPi-writer for MAC.

1.3 Find the IP to the PI, i logged in to my router to find the IP.

2 RECOMPILE CGMINER TO BITMAIN:S VERSION.

This will recompile the cgminer so it will work with Antminer U1 USB.

2.1 SSH to the pi using: ssh minepeon@[yourip], default password is peon.

2.2 type in the following commands: ( the autogen.sh command will take a lot of time )

sudo pacman -S git base-devel ncurses curl libusbx jre7-openjdk-headless
cd /opt/
sudo git clone https://github.com/bitmaintech/cgminer.git
cd cgminer/
sudo ./autogen.sh --enable-bmsc --enable-bitmain
sudo make install

2.3 DONE!

with this setup it will ONLY work with bitmain chips, if you want to run minepeon with other devices, for example BitFury, you need to add it to the autogen.sh command.

I think you gotta add "sudo pacman -Syu" first?