Quote from: nirangal337 on August 10, 2018, 01:29:53 PM

Hi All,

I'm building a mining rig and did all the setup and loaded windows 10 to my SSD (after replacing the laptop hdd with Ssd and installing windows). But when connected all my cables to the respective ports and started the rig, the bios is loaded during the first start. I set my DVD drive in Boot order as priority 1, then set SSD as priority 2. Now when I start the rig it gets stuck with a blank screen and the windows 10 is not loaded from the SSD, it's just a black screen in the monitor. (Connected the HDMI from main GPU to monitor)

I remove the SSD and tried to use in laptop and could load the windows 10 successfully.

Here few details of all peripherals i'm using in the Rig.

Mother board - TB 250 BTC Pro

CPU - Celeron 3930

PSU - EVGA 850 W GQ

GPU - Two RX580 (One is XFX made and another one ASUS made)

SSD - 256GB

Ram - 8GB DDR4

DVD drive

Can some one has a similar experience and know why the system is not booting ?

Sounds to me like a bios issue...check to make sure you you have the appropriate settings