Quote from: rostbiffen on January 12, 2014, 02:39:40 AM

Hi,
Yesterday my friend caled me and said that one of our mining equipment was on fire, while they sleep.
he woke up and then had to air out the apartment for 3 hours

Now when i think about it its crazy that people have high voltage equipment, that is getting realy hot, AT HOME?

From now i will have the equipment in a server room.

Are you guys think about the fire hazard with mining equipment?

Any potential hazard is the responsibility of the owner (you).

I have about 20,000 watts at my home and sleep safe every night. Each of the outlets is GFCI and 20 amps. I have fire suppression systems on the ceiling and walls that won't damage electronics. Everything is on racks on a concrete floor with 10,000 CFM of air constantly circulating. I use 18 AWG power cables to each PSU(850 to 1300 watts each). Everything runs cool from the breakers to the outlets to the PSU's.

If any of the units were to short then the expensive PSU's would be the first to trip, if that fails the GFCI would trip next, if that fails the breaker may trip so as a last resort the fire suppression system would kick in and gain control of the situation once the breaker finally trips or the problem is contained. Meanwhile I'm being texted to death from the Smoke Detection System attached to the 5,000 CFM outtake fan. Because of the amount of air volume there would be no smoke buildup to damage the remaining equipment.

I had some Gridseed (both G-blade and 5-chip) units that shorted but my first line of defense (expensive PSU's) saved the day. All of the gridseed (bad) went into the garbage and the rest of the Gridseed was sold as I've concluded they are poorly manufactured and at great risk of shorting. So it's up to you to make sure you don't put yourself or others lives in danger when mining. Cool

http://s1.postimg.org/4ur80g6ff/Screen_Shot_2014_11_09_at_4_47_12_PM.jpg

What I (solely) run now:
Rockminer T1's.
Bitmain AntMiner S3+'s.
Innosilicon A2 Terminator's.
Various GPU rigs.