Quote from: kodokbuduk on September 11, 2018, 11:42:15 AM

Quote from: maxouni on September 11, 2018, 07:38:52 AM

Quote from: boxalex on September 10, 2018, 08:41:20 AM

Quote from: Andartis on September 09, 2018, 10:33:41 AM

Quote from: boxalex on September 08, 2018, 10:46:07 AM

3 chains gone here as well.

Followed all instructions provided by the Bitmain Support page to upgrade to latest firmware with SD flashing, but i wasn't able to flash the E3 somehow even i made it step by step as suggested.

Can someone that managed the flashing through SD card make a guide/tutorial step by step? Pretty sure the Bitmain guide misses something or it would have worked out, not?

Thx in advance.

It just does not work. Even Bitmain said, it does not work. The E3 was the worst miner so far.

So nobody managed to flash the SD card so far? Seriously?

I have flashed from SD yesterday.
1.Unzip and copy T9+ firmware fails to SD. https://file11.bitmain.com/shop-product/firmware/t9%2B%20-SD%20Tools.zip
2. Insert SD and move jumper.
3. Switch miner on and wait 30 sec till blinking of both status lights simultaneously.
4. Power miner off, remove SD and move jumper to its original location.
Now you have fully functional T9+ control board which can be flashed by the E3 firmware.
5. Download E3 Firmware : https://file11.bitmain.com/shop-product/firmware/Antminer%20E3/Firmware/0072018071812344880187tM1RPd0668/Antminer-E3-20180806.tar.gz
6. Power miner up.
7. In Upgrade page select downloaded E3 firmware for flashing, uncheck "Keep settings" checkbox and flash firmware.

So we need to use T9+ firmware first via SD card (flashed), then use E3 firmware on web?

Anyone has experience by updating the E3 firmware, it can fix the missing chain? i just dont get it. I think the hashboard has the problem (same as D3, missing chain cannot be fixed with updating the firmware).

I tried it, didn't work for me. Even the T9+ SD didn't work as the status lights just don't blink. Somethning just isn't working as it should. I have flashed a lot of Baikals so far, so flashing isn't something new to me, but with that E3 i just don't manage to flash the control panel successfullly....