Quote from: badbonez on January 17, 2014, 04:35:04 AM

Quote from: twib2 on January 17, 2014, 03:45:09 AM

Looking at your settings and your proxy - you are having your proxy pass through the user names in your cubes rather than defining it proxy-wide, via the "-cu" and "-cp" switches. You can do that of course, but then you have to be sure that the usernames in your cube setups will work on the pool directly.

Hope this helps!
- Tye

I don't know how to use the -cu or -cp switch. Can you give me an example? Thanks!

Quote from: Henchman24 on January 17, 2014, 02:43:01 AM

In addition to the gateway change, you'll need to change your proxy line to

Code:

mining_proxy.exe -o us2.eclipsemc.com -p 3333 -gp 8330 -q

Quote from: TheWoodser on January 17, 2014, 02:36:07 AM

Your Gateway is blank....Needs to be your router IP address....

Thanks, Gents! One or both of these got me mining! Cheers!

Wait, I'm going to take a longshot here, -cu is and -cp ? I'll try that...

EDIT: Well, I tried that as in: -cu username -cp password but the mining did not register on the site. If I use my username/password in the settings panel, it works. But I'd like the functionality of using a command line version. If someone can give me an example in syntax. Thanks.

Without options, the default mining_proxy port is 8332. You configured your cubes to access 8330, so adding the string "-gp 8330" was your resolution. You must set your worker:password,worker:password in the cube settings... it then passed it through mining_proxy as it converts the getwork protocol to stratum and then accesses your pool with those worker settings.