Those of you who use CGwatcher to monitor your performance, which values do you typically have in "Efficiency" field?
As I understand, it shows Getworks to Accepted shares ratio. I noticed that it used to hover between 90% and 100% on this miner (7970 at 760kh/s) before the boom of middlecoin, but nowadays it never goes above 40%. I also use "restart miner if # of accepted shares doesn't change for 3 minutes", but I guess with the latest upping to 1024 diff I have to be more conservative and set it to like 5 or 6 minutes.
What do you guys think?
My efficiency is decreasing for rigs with stats running since a few days and is dramatically low for the rig I've just restarted.
2 2xgpus rigs were around 96% they are now around 84% without a restart.
1 1xgpu rig was around 50% and is now around 25% after a restart.
As yesterday I had quite a high unexchanged balance I can't already say if my payouts will be lowered.
My hashrate seen on middlecoin stats is still approximatively the same (higher in fact but I added one more 7950).
There are many ways to calculate efficiency, dunnow which is the more accurate.
Diff from middlecoin increased from 512 to 1024. That's why. That number doesn't mean anything but a stat that you can compare to itself and only when diff stays the same