Quote from: bitcoin.dbi on September 17, 2018, 07:14:21 AM

Quote from: PhoenixMiner on September 17, 2018, 07:05:09 AM

CLO is added already (since 3.0c), you just need to specify -coin clo and it will mine the devfee in CLO. As for MOAC - it will be added in 3.5d, which will be released later today or tomorrow morning.

Big thanks. Because it is pretty annoying when devfee switching DAG file 2 times.
P.S. any ideas why this command doesnt work with r9 280x card or it only support Polaris? -cvddc 1050 -cclock 1130 -mclock 1374 -fanmin 100 -powlim -15

R9 280X uses older version of the Overdrive API, which isn't fully supported by PhoenixMiner. We will add this as well as many other hardware control features in PhoenixMiner 3.6 (and no, it won't take as long as 3.5, which was delayed a few times by some unexpected events).

Quote from: Soliqesh on September 17, 2018, 09:37:31 AM

@Pheonixminer -clgreen 1 works so good with RX 580/570 4gb memory, stable hashrate - lower power consumption , but with 8gb memory RX570/580 if i try this kernel my cards have chaotic hashrate, rig 309 mh/s with standart kernel, if -clgreen kernel 304-307, its normal? Logfile https://drive.google.com/file/d/1G4uknUONcpITDHQfBCJkrRx3HfdWaAPB/view?usp=sharing

Yes, unfortunately it is not the same with every card. You can try changing (lowering) the core and/or memory clocks a little as this may help with the green kernels hashrate as strange as it seems. Another option is to try -clkernel 2 but it rarely has significant effect whenever the green kernels are used.

Quote from: ATrump on September 17, 2018, 12:47:32 PM

All my previous tests was made without clgeen. By the way, it looks like clgreen doesn't work with gfx804 (See 2018.09.17:15:36:36.474).

You are quite right. So, we will enable the green kernels on gfx804 too.

Quote from: AlteregoX on September 17, 2018, 12:58:15 PM

Quote from: PhoenixMiner

Quote from: AlteregoX on September 13, 2018, 02:12:19 PM

I'm on Linux and I just noticed Phoenix is slower than Claymore

Hope it's only because Linux version is new

Any advice? mining on NVIDIA

It is possible but we need more information to check and solve the problem. Please let us know the Linux version, the version of the driver, and what cards you are using.

I'm using Ubuntu 18.04, 396.54, 1060 gtx.

We are testing with Ubuntu 18.04 now, it works fine with AMD cards. Please note that there is no support for hardware control options (-cvddc, -cclock, -mclock, etc.) under Linux, so you have to set the clocks with some other means.

Quote from: Bigdrago on September 17, 2018, 01:38:43 PM

When turning the rig on and off the hashrate went from 408 to 401.
How is that possible. Is auto-tune that unstable?

Shouldn't be, we usually get the same gt values every time with maximum 1-2 gt difference between the runs. If you suspect that the auto-tune is the problem, just put the best found -gt values in your config.txt or in the command line.

Quote from: salvo2002 on September 17, 2018, 11:12:12 PM

Shoutout for the Linux version!

I ran a comparison test for ~29hrs between PhoenixMiner and Claymore. Results here: https://forum.hiveos.farm/t/custom-miner-phoenixminer/7391/2

Keep up the great work PhoenixMiner Devs!

Nice to hear!

We are already working on PhoenixMiner 3.6.

Quote from: Falconnn on September 18, 2018, 12:00:03 AM

how to set -150 GPU Voltage in Phoenix miner, manuali can set in trixx

i have 200W less consumption, 9 AMD cards use 1300W -1350w max elec, moded bios

You can use the -cvddc command-line option to specify the voltage in mV. For example, -cvddc 850 will set the core voltage to 850 mV.