Quote from: sarcheer on September 24, 2018, 08:16:46 PM

So I went ahead and attempted this OS install.

1st problem: quick guide is not very descriptive! For instance, the requirement to get the control board on the T1 to recognize your SD card requires you to adjust the jumpers on the control board. No guide is given on this besides J1 0 1. I removed the control board from my T1 to get a good look at the jumpers (had to try and find them as no guidance was given on where they were on the board). Upon finding them I had no idea what to do from there or even how to adjust it to make its status 0 1. This is could simply be from my lack of hardware experience.

2nd problem: There is no SD card reader on the T1 control board. From what I can gather from the quick guide, this OS install is predicated upon using the SD card slot. So this is a hard stop and I'm not sure how to proceed.

Can the Braiins team please provide more detailed instructions, like a video perhaps, on the complete, step-by-step process to get the Braiins OS installed on our machines?

Yeah, this isn't going to flash easily on production T1's since those don't have SD card slots.