Quote from: grumpy619 on January 21, 2014, 04:20:33 PM

Hello all. So I received my the unit yesterday. DHL works on MLK day in the US. So at the start i was able to get connected to the machine. I was able to connect from my laptop to the unit via supplied IP address. I followed the direction that was posted via Antminer interface it was the same interface. I then changed the IP to DHCP and connected it to my router. I was able to access the unit after plugging in random IP address to firefox. I went in and added my pool information. I reset and the machine was not hashing at all. I went through the interface and found a list of items that had enable/start/ buttons on them. I went ahead and clicked them and now I can not connect to my unit at all. I pressed the reset button located on the TP-link board but it is not working.
I saw somewhere that someone connected it via USB but not sure what they connected it to. Would I be able to plug this into a Raspberri Pi? On top of that one of the PSU blew. Will this unit still work if one of the PSU is not on? I don't see why it would not. Does anyone have any suggestions on getting this damn thing to work. Thanks ahead of time.

Ouch, you should not have randomly enabled things (which you know now) - some of them even warn you that you might lose connectivity, etc. Also, the TPLink reset sets that device back to stock settings, so you'll have to go to its default IP address now. You should also be able to connect the USB port to a computer (yes, a rPi counts) running CGMiner/BFGMiner and running the Avalon directly - in cgminer, it'll show up as AVA0 if it was compiled with "--enable-avalon"